Project Planning and Installation

Planning an autonomous heating system requires careful consideration of the apartment's layout and technical specifications. (αυτονομη θερμανση)

Key Factors to Consider
Moving risers.
Adding radiators to balconies.
Removing partitions, for example, between the kitchen and living room.
Bathroom remodeling.
Selecting Elements
Radiators: Cast iron, steel, or bimetallic.
Piping: Plastic, metal, or steel.
Configuration: Single-pipe or double-pipe systems.
Circulation: Natural or forced.
Wiring: Top or bottom distribution.
Connection: Vertical or horizontal layouts.
Installation Procedure
Installation of the autonomous heating system is done in the following steps:
Old Component Removal
Disconnect the old radiators, pipes, and risers.
Replace or seal the outdated sections with new efficient components.
Installation of Boiler
Place the boiler on a solid base near the external wall and align properly for safety.
Mounting of Radiators
Radiators will be fixed with strong iron hooks or brackets for maximum safety and efficiency.
Laying Pipes
The reinforced polypropylene pipe is used for durability and better performance.
Connecting them in all rooms is done with proper tools and techniques.
Adding Valves
Installing the ball valves near radiators will make future maintenance easier and less cumbersome.
Testing of the System
Leak testing can be done using a pressure gauge or soapy water.
Connection to the Gas Network
Connect the boiler with the gas network, attaching a meter and a shut-off valve for safety.
Filling the System
The circuit should be filled with water; after that, the trapped air is released with the help of air vents, such as Mayevsky taps.
Thus, in case of proper maintenance, an autonomous heating system is able to provide reliable, inexpensive heat, meeting individual needs. (αυτόνομη θέρμανση σε διαμέρισμα πολυκατοικίασ)